NTS Tempe AZ Facility

Tempe, Arizona

1155 West 23rd Street, Suite 11A,
Tempe, AZ 85282
T: 480.966.5517 | F: 480.966.5525
Todd Hosier - General Manager
Sales | Customer Service | Brochure

Facility Highlights

NTS Tempe is part of the largest worldwide network of independent testing laboratories, providing expert engineering and testing services to a wide range of industries in both the commercial and military sectors.

NTS runs start-to-finish turnkey projects from a simple qualification test of a new product, to the efficient management of your complete laboratory. Our extensive knowledge of current test and conformity requirements, both domestic and international, can assist you in your product assessment and define the proper requirements for your test program to achieve maximum customer acceptance. Capabilities include more than 20 different chamber, shaker, and drop tower test platforms.

The technical personnel at NTS Tempe have extensive experience in EMI/EMC, hydraulics/pneumatics, dynamics, and environmental testing. We have the expertise to accurately monitor equipment response and performance during the most severe test environments. Our technicians and engineers are recognized experts in the performance of a wide array of environmental simulations

Environmental Testing

  • Large selection of temperature/humidity chambers from 2'x2'x2' to 8'x8'x8' walk-in chamber
  • Thermal shock, 3 shuttling chambers
  • Altitude: up to 100,000 feet
  • Thermal Vacuum: -180° to 180°C space simulation with TQCM capability, multi-zone temperature control; chambers: 8, 56, and 85 cubic feet
  • Explosive decompression and Explosive atmosphere
  • Salt fog chambers; wind driven rain, up to 40mph; blowing sand / dust
  • Fluid susceptibility testing
  • Solar Radiation: 4 chambers; up to 200 square foot test area

Primary specifications for environmental testing include: MIL-STD 810, MIL-STD 202, RTCA DO160, ASTA, ASTM, NEMA, GR 63-CORE, GR 487-CORE, GR 13-CORE, UL 50, ETSI 300-019-xx, IEC 60068-2-xx.

Dynamic Testing

  • Electro-Dynamic and mechanical shaker systems: up to 1" displacement; 1,200 to 20,000 force pounds; 5Hz to 3000Hz
  • Up to 16 channels of data acquisition and analysis capability, including new Spectral Dynamics Jaguar control/analysis system
  • Static / Dynamic load
  • Acceleration: 57, 36, and 11-inch radius; up to 2000g's; up to 40 slip-rings
  • Drop towers: up to 40 foot drop and package drop capability

Primary specifications for dynamic testing include: MIL-STD 810, MIL-STD 202, RTCA DO160, ASTA, ASTM, GR 63-CORE, GR 487-CORE, GR 13-CORE, UL 50, ETSI 300-019-xx, IEC 60068-2-xx.

EMI / EMC Testing

Reverb Testing Services
  • Radiated Susceptibility 200 V/m, frequency range to 10kHz to 40GHz
  • Radiated Emissions: 30 Hz to 40 GHz
  • RF Reverberation Chamber Testing to DO-160 Category L levels from 200 MHz to 18 GHZ, test frequencies as high as 40GHz are possible.
  • EMP pin and bulk cable testing
  • Lightning
  • Shielding effectiveness

Primary specifications for EMI / EMC testing are RTCA/DO-160 and MIL-STD-461.


  • Proof pressure: hydrostatic pressure to 40,000 psig; pneumatic pressure to 6,000 psig; Leak testing

Primary specifications for fluids testing include MIL-STD-810 and MIL-STD-202.


NTS Tempe is also partnered with the Artesyn Embedded Technologies commercial EMC laboratory in Tempe, AZ. This lab is part of the NTS Verizon NEBS Program addressing most of GR1089. The commercial EMC testing services also address the domestic US (FCC) and international Canada (ICES), European Union (CE), Japan (VCCI), Australia (c-Tick/RCM) & Korean (KC) EMC requirements. In addition to the local EMC services the lab can support local overflow environmental/reliability and product safety NRTL services as needed.

More Information

Click here to download the NTS Tempe fact sheet for more details on specifications, tests, and capabilities. Contact us today to discuss your next program!

Updated April 5, 2016