Loading Events

Upcoming Events

Events Search and Views Navigation

Event Views Navigation

October 2020

IPC-A-600 Training and Certification Program

October 12 @ 8:00 am - October 14 @ 5:00 pm
NTS Baltimore, 5 North Park Drive
Hunt Valley, MD 21030 United States
+ Google Map

IPC-A-600 Training and Certification Program For years, IPC-A-600 has set the standard for PCB workmanship quality with its comprehensive acceptance criteria for target, acceptable and nonconforming conditions on bare printed boards. PCB manufacturers and assemblers alike rely on this internationally recognized document to improve their understanding of printed board quality issues as well as help enhance communication with their suppliers and customers. This makes IPC-A-600 one of the most widely used standards ever published by IPC, and a natural choice…

Find out more »

IPC-6012: Qualification and Performance for Rigid Printed Boards

October 20 @ 8:00 am - October 23 @ 5:00 pm
NTS Anaheim, 1435 Allec Street
Anaheim, CA 92805 United States
+ Google Map

IPC-6012: Qualification and Performance for Rigid Printed Boards The IPC-6012C standard establishes and defines the qualification and performance requirements for the fabrication of rigid printed boards. IPC received hundreds of requests from companies worldwide to support this critical standard with a formal training program that recognizes individuals as qualified instructors and application specialists. Now, IPC has an industry developed and approved comprehensive training and certification program based on IPC-6012 that gives companies all the tools they need to increase employee…

Find out more »

November 2020

Lightning Protection of Aircraft Fall

November 9 - November 13

Lightning Protection of Aircraft   This four and one-half day course has been presented in person at Lightning Technologies in Pittsfield, Massachusetts since 1984.  They will be continued virtually via Zoom until the COVID-19 crisis has passed, when they will be resumed in person.    Lightning Protection of Aircraft is a four-and-one-half day course to familiarize aircraft design and certification engineers with the interaction of lightning and static electricity with advanced technology aircraft. The course begins by bringing the student…

Find out more »

IPC-A-610: Acceptability of Electronic Assemblies

November 9 @ 8:00 am - November 12 @ 5:00 pm
NTS Baltimore, 5 North Park Drive
Hunt Valley, MD 21030 United States
+ Google Map

IPC-A-610: Acceptability of Electronic Assemblies With its comprehensive criteria for printed circuit board assemblies, IPC-A-610 is the most widely used inspection standard in the electronics industry — and has earned an international reputation as the source for end-product acceptance criteria for consumer and high reliability printed circuit assemblies. Now updated to lead free, and available in many languages, IPC-A-610 has been embraced by original equipment manufacturers and electronics manufacturing services companies worldwide. This training is available in several languages. CHOOSE…

Find out more »

IPC-A-600: Acceptability of Printed Boards

November 11 @ 8:00 am - November 13 @ 5:00 pm
NTS Anaheim, 1435 Allec Street
Anaheim, CA 92805 United States
+ Google Map

IPC-A-600 Training and Certification Program For years, IPC-A-600 has set the standard for PCB workmanship quality with its comprehensive acceptance criteria for target, acceptable and nonconforming conditions on bare printed boards. PCB manufacturers and assemblers alike rely on this internationally recognized document to improve their understanding of printed board quality issues as well as help enhance communication with their suppliers and customers. This makes IPC-A-600 one of the most widely used standards ever published by IPC, and a natural choice…

Find out more »

Lightning Protection of Avionics Fall

November 16 - November 20

Lightning Protection of Avionics   This four and one-half day course has been presented in person at Lightning Technologies in Pittsfield, Massachusetts since 1984.  They will be continued virtually via Zoom until the COVID-19 crisis has passed, when they will be resumed in person.    Lightning Protection of Avionics is a four-and-one-half day course for engineers concerned with lightning protection design and certification for aircraft avionics, control, and other electrical systems. The course includes a detailed study of the physics…

Find out more »

December 2020

IPC-WHMA-A-620: Requirements and Acceptance of Cable and Wire Harness Assemblies

December 14 @ 8:00 am - December 17 @ 5:00 pm
NTS Baltimore, 5 North Park Drive
Hunt Valley, MD 21030 United States
+ Google Map

IPC-WHMA-A-620: Requirements and Acceptance of Cable and Wire Harness Assemblies IPC/WHMA-A-620 describes acceptability criteria for crimped, mechanically secured, and soldered interconnection and the corresponding lacing/restraining criteria associated with cable and harness assemblies. Now at Revision C (published January 2017), WHMA-A-620 is the industry consensus standard for cable and wire harness fabrication and installation. Classes of products are defined and include criteria for Target, Acceptable, Process Indicator and Defect conditions to support the collection of visual quality acceptability requirements for each…

Find out more »

August 2021

MIL-STD-810H: Understanding, Planning and Performing Climatic and Dynamic Testing

August 16, 2021 @ 8:00 am - August 19, 2021 @ 4:00 pm
NTS Santa Clarita, 20970 Centre Pointe Parkway
Santa Clarita, CA 91350 United States
+ Google Map

MIL-STD-810H: Understanding, Planning and Performing Climatic and Dynamic Testing This 4-day class focuses on the purpose of each test, the equipment required to perform each test, and the methodology to correctly apply the specified test environments. This class is applicable to ANY testing done to Environmental test standards including DO-160, IEC specifications, and all other documents which provide test methodology for environmental testing. The test methods explained and taught in this class apply to environmental testing of ANY equipment whether…

Find out more »

September 2021

MIL-STD-810H: Understanding, Planning and Performing Climatic and Dynamic Testing

September 13, 2021 @ 8:00 am - September 16, 2021 @ 4:00 pm
NTS Boxborough, 1146 Massachusetts Ave
Boxborough, MA 01719 United States
+ Google Map

MIL-STD-810G: Understanding, Planning and Performing Climatic and Dynamic Testing This 4-day class focuses on the purpose of each test, the equipment required to perform each test, and the methodology to correctly apply the specified test environments. This class is applicable to ANY testing done to Environmental test standards including DO-160, IEC specifications, and all other documents which provide test methodology for environmental testing. The test methods explained and taught in this class apply to environmental testing of ANY equipment whether…

Find out more »

October 2021

MIL-STD-810H: Understanding, Planning and Performing Climatic and Dynamic Testing

October 18, 2021 @ 8:00 am - October 21, 2021 @ 4:00 pm
NTS Orlando, 5325 Old Winter Garden Road
Orlando, FL 32811 United States
+ Google Map

MIL-STD-810H: Understanding, Planning and Performing Climatic and Dynamic Testing This 4-day class focuses on the purpose of each test, the equipment required to perform each test, and the methodology to correctly apply the specified test environments. This class is applicable to ANY testing done to Environmental test standards including DO-160, IEC specifications, and all other documents which provide test methodology for environmental testing. The test methods explained and taught in this class apply to environmental testing of ANY equipment whether…

Find out more »
+ Export Events

Ask an Expert

We are here to help, just ask! Our experts will help determine the best solution for your needs.

Newsletter Signup

Get the latest insights from NTS!

SIGN UP